Heavy drop Flamingo Springers. This heavy drop design is specifically designed for longer forks, and frames with more rake, starting at +11” and up. The Gusher Springer is our head Hancho. We have spent over 20 years studying forks to land on this design. Don’t let our good looks fool you, these front ends are hand made in the USA out of premium materials, built to be durable, serviceable, and handle like butter.
If you have any questions about ordering, what length to order, rake/trail please see our “Springer Help” page here. Our chart based system is very specific. In order to nail the exact fork for your application is is very important to follow our easy, step by step measuring procedure located in the “springer help” section. Or, if you would just like to speak to a live dude please don’t hesitate to give us a call, or shoot us an email.
Rockers;
This Listing is for our Heavy Drop Rockers, Designed for more rake, and longer forks. Our “Flamingo” style rockers are very specifically designed for handleability, and to accommodate a wide range of different length forks, and frame applications with different rake numbers. these rockers feature a “trunnion” style bushing design that has a wide footprint which makes it very stable, and is by far the best type of rocker stud/bushing design for any springer. This is the very same style used on Harley springers up until the inception of hydraulic forks in 1949. Our bushings are hand made out of 932 bronze. This bushing material is top of the line, it will outlast, and outperform any other bushing material on the market. The body of the rockers are heavy duty, made of 3/8" thick 1018 cold finished steel.
Trees;
Our trees are made out of heavy duty 3/4” thick 1018 cold finished steel. They feature counter bored handlebar/riser mounts in top tree with a mount spacing of 3" on center, counter bored headlight mount in bottom tree, and are drilled and tapped for internal fork stops.
Legs;
Our legs are 5” on center. Rear legs are made of heavy duty 1.125” diameter 1018 cold finished solid steel rod. Front legs feature our unique design, also made out of 1018 cold finished steel that can be ordered in straight 5/8” hex, twisted hex, or 5/8” round bar. Spring perch on front legs feature a 1” depth of thread with a pinch bolt on back side to hold the spring rods nice and tight, and still allow the rods to be serviced.
Axles;
All springers come ready to go with axles. Our axles are very strong, made out of 4140 chromoly, and are 5/8” in diameter. We prefer this size for its sleek look. If you must run 3/4” wheel bearings, stainless steel reducers are provided for springer orders upon request. These reducers insert through your bearings and in to your inner hub spacer effectively reducing the inner diameter to 5/8”.
Hardware;
All hardware provided is premium chrome hardware from Colony.
All of our parts are hand made, in house, with love, the old fashioned way using manually operated machines (no CNC), manual tooling, and 100% TIG Welded.
All chrome parts feature a high quality show chrome finish done locally in Nashville, TN.
This is a "MADE TO ORDER" part. Typical turnaround time on made to order parts is 3-6 weeks before shipment. Once your items ship you will receive a shipment confirmation email with a tracking link.
Thank you all! - J Ryan
Heavy drop Flamingo Springers. This heavy drop design is specifically designed for longer forks, and frames with more rake, starting at +11” and up. The Gusher Springer is our head Hancho. We have spent over 20 years studying forks to land on this design. Don’t let our good looks fool you, these front ends are hand made in the USA out of premium materials, built to be durable, serviceable, and handle like butter.
If you have any questions about ordering, what length to order, rake/trail please see our “Springer Help” page here. Our chart based system is very specific. In order to nail the exact fork for your application is is very important to follow our easy, step by step measuring procedure located in the “springer help” section. Or, if you would just like to speak to a live dude please don’t hesitate to give us a call, or shoot us an email.
Rockers;
This Listing is for our Heavy Drop Rockers, Designed for more rake, and longer forks. Our “Flamingo” style rockers are very specifically designed for handleability, and to accommodate a wide range of different length forks, and frame applications with different rake numbers. these rockers feature a “trunnion” style bushing design that has a wide footprint which makes it very stable, and is by far the best type of rocker stud/bushing design for any springer. This is the very same style used on Harley springers up until the inception of hydraulic forks in 1949. Our bushings are hand made out of 932 bronze. This bushing material is top of the line, it will outlast, and outperform any other bushing material on the market. The body of the rockers are heavy duty, made of 3/8" thick 1018 cold finished steel.
Trees;
Our trees are made out of heavy duty 3/4” thick 1018 cold finished steel. They feature counter bored handlebar/riser mounts in top tree with a mount spacing of 3" on center, counter bored headlight mount in bottom tree, and are drilled and tapped for internal fork stops.
Legs;
Our legs are 5” on center. Rear legs are made of heavy duty 1.125” diameter 1018 cold finished solid steel rod. Front legs feature our unique design, also made out of 1018 cold finished steel that can be ordered in straight 5/8” hex, twisted hex, or 5/8” round bar. Spring perch on front legs feature a 1” depth of thread with a pinch bolt on back side to hold the spring rods nice and tight, and still allow the rods to be serviced.
Axles;
All springers come ready to go with axles. Our axles are very strong, made out of 4140 chromoly, and are 5/8” in diameter. We prefer this size for its sleek look. If you must run 3/4” wheel bearings, stainless steel reducers are provided for springer orders upon request. These reducers insert through your bearings and in to your inner hub spacer effectively reducing the inner diameter to 5/8”.
Hardware;
All hardware provided is premium chrome hardware from Colony.
All of our parts are hand made, in house, with love, the old fashioned way using manually operated machines (no CNC), manual tooling, and 100% TIG Welded.
All chrome parts feature a high quality show chrome finish done locally in Nashville, TN.
This is a "MADE TO ORDER" part. Typical turnaround time on made to order parts is 3-6 weeks before shipment. Once your items ship you will receive a shipment confirmation email with a tracking link.
Thank you all! - J Ryan
