Ok Folks! We are giving away one of my personal bikes along with 3 Gusher Cycles parts including an 11” Over Springer, a ChopTop Sissy Bar, and a set of Z-Bolt Handlebars. All fresh from chrome and ready to ship. Four prizes, four separate draws. First draw gets the bike, second draw gets the springer, third draw gets the sissy bar, and fourth draw gets the bars. Free shipping/delivery is included to each winner. Each spot is $75, 239 spots available. International players are welcome but must cover shipping fees. Once all spots are filled we will go live on instagram to draw the lucky winners.
The Bike is extremely dialed in and ready for whatever you want to throw at it. Shovelhead swingarm chopper with clear title in my name. I built this bike very meticulously from the crank out using all premium parts. The motor is 74”, and 100% rebuilt. Heads have a complete Kibblewhite valve train from seats to springs and everything in between. S&S hydraulic lifters, Andrews cam, Jims shafts/gears, Timken bearings etc. The transmission Is also 100% rebuilt using a complete Andrews, close ratio gear set, and shafts built inside an early ‘78 ratchet top case. Kick only. Primary is open belt BDL. New S&S E carb, and FnA Tight seal kit. Modified swingarm frame using covered shocks relocated to be much narrower, and give the proper stance. Fresh Timken swinger, and neck bearings. Custom made stainless sissy bar, and Lowbrow Mantaray fender mounted independently to the swingarm. Custom made two peice seat covered by Counter Balance Cycles. Front fork is a custom made narrow 41mm FL style with custom made cowbell adapters. Both wheels are custom laced. Front wheel is 21” with hamburger drum that actually works. Rear wheel is 19” laced dual flange with full GMA disk set up. Custom made foot controls off rear motor mount. Hand made shifter. Custom mounted OEM style horseshoe oil tank and Gusher oil lines. The sissy bar was specifically made to accommodate the vintage hand made leather bag so it is included as well. Custom painted Wassel tank. New tires front and back. Handlebars are a one off of Gusher “Monkey Bois”. Dyna S ignition and Dyna coil. This bike is currently hand shift. It is very easy to ride, but if the winner prefers foot shift we will switch it over free of charge. For all updates and videos refer to the gusher cycles instagram page.
GOOD LUCK!!!
Ok Folks! We are giving away one of my personal bikes along with 3 Gusher Cycles parts including an 11” Over Springer, a ChopTop Sissy Bar, and a set of Z-Bolt Handlebars. All fresh from chrome and ready to ship. Four prizes, four separate draws. First draw gets the bike, second draw gets the springer, third draw gets the sissy bar, and fourth draw gets the bars. Free shipping/delivery is included to each winner. Each spot is $75, 239 spots available. International players are welcome but must cover shipping fees. Once all spots are filled we will go live on instagram to draw the lucky winners.
The Bike is extremely dialed in and ready for whatever you want to throw at it. Shovelhead swingarm chopper with clear title in my name. I built this bike very meticulously from the crank out using all premium parts. The motor is 74”, and 100% rebuilt. Heads have a complete Kibblewhite valve train from seats to springs and everything in between. S&S hydraulic lifters, Andrews cam, Jims shafts/gears, Timken bearings etc. The transmission Is also 100% rebuilt using a complete Andrews, close ratio gear set, and shafts built inside an early ‘78 ratchet top case. Kick only. Primary is open belt BDL. New S&S E carb, and FnA Tight seal kit. Modified swingarm frame using covered shocks relocated to be much narrower, and give the proper stance. Fresh Timken swinger, and neck bearings. Custom made stainless sissy bar, and Lowbrow Mantaray fender mounted independently to the swingarm. Custom made two peice seat covered by Counter Balance Cycles. Front fork is a custom made narrow 41mm FL style with custom made cowbell adapters. Both wheels are custom laced. Front wheel is 21” with hamburger drum that actually works. Rear wheel is 19” laced dual flange with full GMA disk set up. Custom made foot controls off rear motor mount. Hand made shifter. Custom mounted OEM style horseshoe oil tank and Gusher oil lines. The sissy bar was specifically made to accommodate the vintage hand made leather bag so it is included as well. Custom painted Wassel tank. New tires front and back. Handlebars are a one off of Gusher “Monkey Bois”. Dyna S ignition and Dyna coil. This bike is currently hand shift. It is very easy to ride, but if the winner prefers foot shift we will switch it over free of charge. For all updates and videos refer to the gusher cycles instagram page.
GOOD LUCK!!!
Image 1 of 17
Image 2 of 17
Image 3 of 17
Image 4 of 17
Image 5 of 17
Image 6 of 17
Image 7 of 17
Image 8 of 17
Image 9 of 17
Image 10 of 17
Image 11 of 17
Image 12 of 17
Image 13 of 17
Image 14 of 17
Image 15 of 17
Image 16 of 17
Image 17 of 17